Testing machines METROTEST RGM, SEM, MPD, ISS, UMP, etc.

Test machines are test installations consisting of a loading device with a hydraulic or electromechanical drive and a control cabinet.

The machines are designed for testing tensile, compression, bending, wear, deformation, static fatigue, torsion (twisting) of samples made of metals, building materials, rubber, paper, polymer and other materials, as well as individual products and their elements.

Universal RGM testing machines are manufactured in accordance with GOST 28840-90 and are designed for testing metals and alloys based on them, including reinforcing steel, structural steels, cast iron and other materials in stretching, compression and bending modes, as well as, with the use of special equipment, provide the possibility of testing for puncture, shear, cut and bend.

Universal dynamic testing machines UIM-D are manufactured in accordance with GOST 28840 and are designed to determine the mechanical properties of materials during dynamic, static and cyclic tests of samples of non-ferrous and ferrous metals, building and composite materials for fatigue.

Dynamic PIM-MR magnetic resonance machines allow fatigue tests to be carried out both in symmetric cycles and under static stretching conditions, as well as tests for bending with torsion, torsion with tension-compression, etc.

Universal SEM testing machines are manufactured in accordance with GOST 28840-90 and are designed for tensile, compression and bending tests of samples made of rubber, plastics, polymer materials, wood, textiles, waterproof materials, nonwovens, metal sheets, foil, etc.

Machines for testing materials for creep and long-term strength of MPD are designed for testing samples at normalized values of force (load) and elevated temperature when determining the time to destruction of samples or measuring the deformation of samples in the stretching mode in the air.

Machines for torsion (twisting) MK, ISS, ISS-A are designed for testing steel wire, wire made of non-ferrous metals and their alloys.

UMP spring testing machines are used in factories that manufacture various types of springs, including tension and compression springs, as well as in enterprises that use springs in critical units to control their quality, in technical educational institutions for laboratory work, etc.

CMM machines are designed for testing for bending of wire according to GOST 1579-93, sheet and strip rolled tapes - according to GOST 13813-68.

MIO cutting machines are used for the preparation of standard samples in accordance with ISO 8004.2, GOST 23785.1, GOST 29104.4, GOST 29104.22, GOST 3813, GOST 16918, GOST 23785.7.

Models: KIM-10, KIM-30-R, KIM-40, KIM-6, MIO-10, MIO-M-5, MIO-M-10, MIO-P, MIO-U, MIO-E-1, MIO-E-2, MK-10, MK-20, MK-3, MK-30, ISS-1000, ISS-2000, ISS-3000, ISS-500, ISS-5000, ISS-A, MPD-30(50)-M, MPD-30(50)-R, MPD-80(100)-M, MPD-80(100)-R, PIM-MR-100, PIM-MR-20, PIM-MR-200, PIM-MR-300, RGM-100, RGM-1000, RGM-10000-G, RGM-1000-I-A, RGM-1000-G, RGM-100-G, RGM-2000, RGM-2000-I-A, RGM-2000-G, RGM-300, RGM-3000-G, RGM-300-I-A, RGM-300-G, RGM-5000-G, RGM-600, RGM-600-I-A, RGM-600-G, RGM-I-A, RGM-A, RGM-G-A, RGM-M, REM.I-0.1, REM.I-0.2, REM.I-0.5, REM.I-1, REM.I-2, REM.I-3, REM.I-5, REM-1, REM-10, REM-100, REM-2, REM-20, REM-200, REM-3, REM-300, REM-5, REM-50, REM-500, REM-600, UIM-D-100, UIM-D-1000, UIM-D-250, UIM-D-50, UIM-D-500, UIM-D-750, UMP.1-100, UMP.1-1000, UMP.1-200, UMP.1-2000, UMP.1-50, UMP.1-500, UMP.2-10, UMP.2-100, UMP.2-1000, UMP.2-20, UMP.2-200, UMP.2-2000, UMP.2-50, UMP.2-500, UMP.2-5000, UMP.4-1000, UMP.4-10000, UMP.4-2000, UMP.4-3000, UMP.4-5000, UMP.5-0,05, UMP.5-0,1, UMP.5-0,2, UMP.5-0,5, UMP.5-1, UMP.5-2, UMP.5-5, UMP.6-10, UMP.6-2, UMP.6-5, UMP.7-100, UMP.7-20, UMP.7-200, UMP.7-30, UMP.7-50, UMP.8-500, UMP.9-10, UMP.9-10-U, etc.